EasiDoser

FEATURES

• The device has an LCD display and keypad on the front of the unit for ease of set up/ programming the pump run time and pump speed; the LCD display also shows relevant information when the unit is running and can be used to access performance data.
• Activation of the device to initiate the pumps can be by means of depressing a button (Manual Mode), or from a machine signal input of 12 to 230V AC or 12-24V DC or Volts-free contact (Automatic Mode) or via a signal from the microprocessor (Direct Mode).
• A combination of time and speed control enables the amount of product dispensed to be determined both by reference to pump speed and run time for accurate dosing.
  • Pump Run Time adjustable from 1 to 5.00 minutes.
  • Pump Speed Control adjustable from 50% to 100%.
  • Pump Start Delay adjustable from 0 to 30 seconds.
• Option of setting a time delay before initiating the pump.
• The unit has a ‘Pump Inhibit’ or ‘Lock-out’ safety feature which prevents consecutive dispensing of chemicals where excessive dosing could be a hazard. This is adjustable from 0 to 30 minutes.
• Data logging facility to record and display performance data, including cumulative run time and cumulative chemical consumption.
• Data logging feature includes monitoring of peristaltic tube run time to alert when tubes need replacing.
• Pump calibration is made via the LCD display and keypad.

Password protected keypad for security.

• Includes low level alarm feature to warn when chemical levels are running low – appropriate lance assemblies can be purchased separately.
• Available with UK, European or other international plugs.